|
|
|
Airsoft Proper Care
Airsoft Proper Care
As an
airsoft gun owner, you should want to take care of your investment so
that it can be used and enjoyed for years into the future. Having an airsoft
gun that wears out before it's time or starts malfunctioning due to poor
airsoft gun care is not only entirely avoidable, but also really
unnecessary. If you've just purchased an airsoft gun and are looking for
ways to keep it in prime condition, here are some great airsoft gun care
tips to consider.
Cleaning the Barrel
The barrel of your airsoft gun should be cleaned after every use. If you
live in a sandy environment, this is especially important. If you own an
electric airsoft gun, you'll want to fire several shots in the
semi-automatic mode in order to decompress the gearbox once you're done
firing, though some guns have a button which will decompress the spring.
With spring air guns, be sure not to leave the gun cocked, with the safety
on to help prevent accidental injury. You'll also want to consider spraying
a non-corrosive silicone spray into the gun barrel and hop-up chamber
occasionally to help keep your airsoft gun in good working order.
Magazine Care
For electric and
spring airsoft guns, you'll want to
empty the magazine after each use to help preserve the strength of the
magaine spring. This will help ensure long time enjoyment from your airsoft
gun. Magazines for gas airsoft pistols though should be left pressurized so
that all the necessary seals stay in tact. If the gas you're using doesn't
have silicon lubricant in it, then add a drop or two on the internals,
otherwise you should be all right. Always remember that when expelling gas
from your airsoft gun to never use the release valve, as you run the risk of
freezing the O ring which can cause gas leakage in the future.
Observing the Batteries
Batteries are an important part of the lifespan
of electric airsoft guns. Be sure to use batteries with the correct voltage.
A battery with excess voltage will cause the gearbox to cycle at a rate that
could damage internal components of your gun; while a battery with voltage
too low can result in lack of power to cycle the gearbox at all. You will
also need to be aware of the mAh of your battery. This will indicate how
long a battery will continue to power your gearbox. Batteries with a higher
mAh have a higher current draw which will increase the firing rate of your
gun.
Airsoft Gun Touch Ups
As you continue to use and enjoy your airsoft gun, you may notice the paint
starting to scratch or wear off. Experts typically advise against touching
up your gun. If a full repainting is required be sure to use a flat, enamel
based spray such as Krylon, or check with an airsoft retailer who will offer
painting service to return your airsoft gun to it's original appearance.
With the proper airsoft gun care, you can ensure that your air gun will be
in excellent working order for many years to come!
|
|
|
|